Super Stearman problem solved. Thanks to all who replied.
#1
Thread Starter
Senior Member
My Feedback: (1)
What a great site !!! Lots of priceless information that probably saved me from killing my new plane. I love my new Saito 72, (First 4 stroke), which I now only give about 1/3 to 1/2 throttle with a little up elevator until she leaves the runway and it works great !! I also took out the "toe in". What a difference!!! I've only been flying for 6 months and this is my first short taildragger. It's also my 8th plane. Planes 1 thru 5 all gave their lives for me. Special thanks to all who shared their knowlege with me to let the Super Stearman live..... I love this hobby!!!
Dennis Flora
Red Bluff
[email protected]
Dennis Flora
Red Bluff
[email protected]
#2
Junior Member
Joined: Sep 2002
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
From: Austin Tx.
Flying for 6 mo. and already at 8 planes and now a Stearman...that's what I call cool. Keep up the good work Dennis.
http://racapullco.netfirms.com/
BTW...the above gallery has an ad banner on it so be fore warned. There are no pop ups though. I hate both but ha...it was free!
http://racapullco.netfirms.com/
BTW...the above gallery has an ad banner on it so be fore warned. There are no pop ups though. I hate both but ha...it was free!
#3
Junior Member
Joined: Jan 2002
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
From: palmyra,
WI
I am building a Great Planes Super Stearman and having trouble with slaving the top wing ailerons. I have located the control horns as shown in the construction manual, but with the push rod installed I can not get the recommened throws. Has anyone else ran into this problem?. Is the manual wrong?. With the push rod removed I can move all four ailerons up and down much more than the recommened throws, so the ailerons themselfs are ok. But when I connect the push rod between the lower and upper aileron and try to move the lower aileron up and down I only get less than a half inch. of throw. Can anyone help?
Thanks
j3cubflyer
Thanks
j3cubflyer



