Crhisten Eagle nitro arf
10-09-2006 | 05:48 PM
#1
Thread Starter
Junior Member
Joined: Mar 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: arab, AL
Crhisten Eagle nitro arf
Hi guys:
I have purchased about four planes from Nitro. I have Christine Eagle, ARF. It is the 1.2 model. I am very happy with the model so far the question I have for anyone out there
is about the dihedral on the lower wing. For me to set the dihedral according to the plans. There is a very large gap between the wings. Does anyone know if this is supposed to be this way. Also, have you had any problems contacting Nitro about replacement parts. I purchased a long ez electric. It came in with a bent canopy, which leaves a white line in the plastic when you straighten it back out. I also purchased the Nitro long easy and yellow. The wheel pants on it are supposed to be yellow, but they came in white. I helped purchased four or five planes in good faith. So if anyone has any information on this company or these planes. I would most certainly appreciated.
Frustrated Jim.
[email protected]
I have purchased about four planes from Nitro. I have Christine Eagle, ARF. It is the 1.2 model. I am very happy with the model so far the question I have for anyone out there
is about the dihedral on the lower wing. For me to set the dihedral according to the plans. There is a very large gap between the wings. Does anyone know if this is supposed to be this way. Also, have you had any problems contacting Nitro about replacement parts. I purchased a long ez electric. It came in with a bent canopy, which leaves a white line in the plastic when you straighten it back out. I also purchased the Nitro long easy and yellow. The wheel pants on it are supposed to be yellow, but they came in white. I helped purchased four or five planes in good faith. So if anyone has any information on this company or these planes. I would most certainly appreciated.
Frustrated Jim.
[email protected]
