Spinner for my Extra
02-06-2003 | 03:47 AM
#1
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: South Daytona,
FL
Spinner for my Extra
I just completed a Sig Extra 300XS minus the spinner...the supplied spinner with the kit was too small for the prop- I have a 3W 20x10 spinning on the front of an FPE 2.4. I was just wondering if anyone has any suggestions for the correct size and recommended brand for this aircraft. Thanks!
02-06-2003 | 04:00 AM
#2
Joined: Feb 2002
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
From: PlainviewNew York
Spinner for my Extra
A 3 1/2 inch should be fine. However you will either have to widen the blade opening or have it done.
Tru Turn will custom cut for the type of prop you are using. At a price.
Tru Turn will custom cut for the type of prop you are using. At a price.
