Nitro model Extra 300S CG
01-30-2009 | 11:49 PM
#1
Thread Starter
Joined: Aug 2005
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
From: Dale,
TX
Nitro model Extra 300S CG
Greetings all,
I have just finished a 60 size Nitro model Extra 300S. The manual that came with the plane was for a 40 size Extra 300S but since I have built my share of planes it wasn't a problem to put together. If anyone has the proper manual for the larger, 60 size plane could you please tell me what the manual recommends for CG. I can make an educated guess but I would feel better setting it up as indicated by
the manual. Thanks in advance for any assistance.
Sonnytex
I have just finished a 60 size Nitro model Extra 300S. The manual that came with the plane was for a 40 size Extra 300S but since I have built my share of planes it wasn't a problem to put together. If anyone has the proper manual for the larger, 60 size plane could you please tell me what the manual recommends for CG. I can make an educated guess but I would feel better setting it up as indicated by
the manual. Thanks in advance for any assistance.
Sonnytex
01-31-2009 | 05:52 AM
#2
Senior Member
Joined: Oct 2005
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
From: Brisbane, AUSTRALIA
RE: Nitro model Extra 300S CG
Nothing quite like backing yourself - http://www.rcuniverse.com/forum/m_8420158/tm.htm
01-31-2009 | 09:00 AM
#3
Thread Starter
Joined: Aug 2005
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
From: Dale,
TX
RE: Nitro model Extra 300S CG
Yup,
Thought I would try the Nitro support page first but it didn't appear I was going to get an answer. Thus my return to the forumn that gets read and folks help if they can.
Sonnytex
Thought I would try the Nitro support page first but it didn't appear I was going to get an answer. Thus my return to the forumn that gets read and folks help if they can.
Sonnytex
