RCU Forums - throttle setup question

RCU Forums (https://www.rcuniverse.com/forum/)

- ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)

- - throttle setup question (https://www.rcuniverse.com/forum/arf-rtf-75/10534378-throttle-setup-question.html)

Wingspam

05-22-2011 10:21 AM

throttle setup question

I just finished putting togather the hanger 9 twist 40 size, it has a 46 ax on front and a 3004 servo for throttle. what is the best way to setup the throttle? I am using the 10c for the radio.

Thanks

scale only 4 me

05-22-2011 10:30 AM

RE: throttle setup question

This is how I do it

1- set throttle servo arm in the middle (90 degrees to pushrod)
2-set the carb at half throttle with the length of push rod,,
3- adjust the "End points"s in the Tx so the servo doesn't bind at either extreme

may have to adjust for throttle trim and throttle stop, but that pretty much it

ro347

05-22-2011 07:38 PM

RE: throttle setup question

Quote:

ORIGINAL: scale only 4 me

This is how I do it

1- set throttle servo arm in the middle (90 degrees to pushrod)
2-set the carb at half throttle with the length of push rod,,
3- adjust the ''End points''s in the Tx so the servo doesn't bind at either extreme

may have to adjust for throttle trim and throttle stop, but that pretty much it

Ditto!

All times are GMT -8. The time now is 05:37 PM.