help with fun world 3d please
 

hey all ok i got a BIG prob. ok i have no idea how to run
the pull-pull on the rudder ,, SO i was thinking about just putting a carbin fiber rod all the way to the back of the plane, i'm going to be running a hitec 5945 servo in the rear, motor is a RCS 180 , if this would be ok please let me know casue like i said ( don't know how and DON"T like it ) ok well please let me know thanks jon



[email protected]

help with fun world 3d please
 

waytoofast:

Go to this review...

Fun World 3D Review

There are some pics of the rudder pull-pull setup. The wires come out above the horiz. stab. You have to look for the holes, but they are there. They are just under the covering. Use their hardware. I have about 50 flights on the plane and there stuff is holding up just fine.

Let me know if I can help.

Jim!