RCU Forums - sig rascal 110 engine and servos

RCU Forums (https://www.rcuniverse.com/forum/)

- ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)

- - sig rascal 110 engine and servos (https://www.rcuniverse.com/forum/arf-rtf-75/2186524-sig-rascal-110-engine-servos.html)

HighRoller

09-19-2004 07:09 PM

sig rascal 110 engine and servos

I was wondering if anyone has installed an O.S. 108 on a Sig Rascal 110 if so how it flies? Also I was wondering does this plane really need high torque servos?

hayman1

09-19-2004 07:24 PM

RE: sig rascal 110 engine and servos

I have Rascal with a little gasser init and it fly's very real like.It's close in size as to the 1.08 so I would think you will be fine,not over powered but ok.As to the use of servo's I would recommend a servo in the medium torque range for the alerons and at least 70 oz for the elevator and rudder,these surfaces are quite large in size.I've had good luck with the Hitec 635's karbonite servo's.

Pinhead159

09-19-2004 11:36 PM

RE: sig rascal 110 engine and servos

my first and second(current) rascal both had standards all around. my current one now has hitec 605 on elev. and rudder but thats it.
Chris

All times are GMT -8. The time now is 05:11 AM.