RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)
-   -   CG Ultimate arf help!! (https://www.rcuniverse.com/forum/arf-rtf-75/239151-cg-ultimate-arf-help.html)

mancha 08-21-2002 10:41 PM

CG Ultimate arf help!!
 
I just bought a used Ultimate ARF from C.Golberg with out a manual!
Can somebody help me with the C.G., and elevator, rudder and ailerons trows?
Thanks

SearchMan 08-22-2002 12:28 AM

C.G. for Goldberg Ultimate Bipe ARF
 
"To determine the Center of Gravity, measure back on the fuselage 2 3/8" from the leading edge of the bottom wing. The C.G. range for this aircraft in 1-7/8" to 2-7/8". Ti is recommended that you balance this model upside down."

From my instruction manual.
SearchMan

SearchMan 08-22-2002 12:34 AM

CG Ultimate arf help!!
 
Setting Control Surface Travels:
Aileron: Gentle= 10 degrees, Aerobatic = 12 degrees
Elevator: Gentle= 12 degrees, Aerobatic = 14 degrees
Rudder: Gentle= 15 degrees, Aerobatic = 23 degrees

The manual suggest that you start by flying this model with the High rates set at the Gentle settings and low rate set at 75% of the Gentle settings.

Hope this helps,
SearchMan

mancha 08-22-2002 02:25 AM

CG Ultimate arf help!!
 
searchman:
thank you very much, if you ever come down for vacations to Cabo San Lucas in Baja Mexico, you will have a plane to fly on Saturday!!
gracias!!


All times are GMT -8. The time now is 02:22 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.