problem with Mini UltraStick ARF
 

I just bought the Mini UltraStick ARF. It came with the motor, servos, and Speed controler. I bought the JR Sport negative shift receiver (RS6UL) and Parkzone's high performance Li-Po battery and charger combo (http://www.parkzone.com/Products/Def...ProdID=PKZ1050).

I installed everything, but I am struggling with a problem. When I plug the battery in all of the servos twitch and I can't control them at all. The throttle doesn't go at all. My LHS said I could bring it back for him to take a look at, but I thought I would run it past here first and see if I can't fix it before then.

Any and all advice is appreciated. Thank you in advance.

David

RE: problem with Mini UltraStick ARF
 

What kind of transmitter? JRs are normally positive shift. Are you using Futaba or Hitech?

If your transmitter is one that will do both PPM & PCM, does it default to PCM? The JRs come set for PCM and you have to set the modulation to PPM.

RE: problem with Mini UltraStick ARF
 

This is the transmitter I have (http://www.*********.org/jr-6102.htm).

Thank you for the reply. Does that help?

RE: problem with Mini UltraStick ARF
 

That appears to be a positive shift transmitter?

The RS6UL receiver comes either negative or positive. Take it back and get a positive shift one

RE: problem with Mini UltraStick ARF
 

Thanks for the posts I'll take it back to him tomorrow and try a positive shift receiver... thank you both for the helpful replies.

David