Modeltech Extra ?
 

I bought a MT Magic for the son-n-law this past holiday, and would like someone to tell me where are you mounting the receiver & battery? This is not his first. Setup w/ 46fx 12.25x3.75 apc. The cg, from what read from other threads, is a bit more aft than recommended. What is recommended for moderate to extreme 3D? I read 30-35% aft, is this ture? [sm=confused.gif]

RE: Modeltech Extra ?
 

Thanks, you all are a lot a help.

RE: Modeltech Extra ?
 

Which plane? The Extra or the Magic?

RE: Modeltech Extra ?
 

Sorry about that, MT Magic, not Extra. The yellow plane.

Thank you

RE: Modeltech Extra ?
 

I am not familiar with the model that you have so cannot help.

I would have to say though that you do yourself no favours with your sarcastic "thanks".

Sometimes an instant answer is not possible so please be patient.

regards piroflip

RE: Modeltech Extra ?
 

If you go to this link and scroll down you'll see some great setup tips and CG placement along with some great video of the magic in action
enjoy
I can tell you from first hand that the magic flys better with a 4 stroke but will still be fun with a 2 stroke
good luck they are a blast to fly

http://www.terynd.com/magic/magicmain.html

RE: Modeltech Extra ?
 

I Tink your confused!!!!!

RE: Modeltech Extra ?
 

Thanks, its a good site. I tried to get Hobby People to call me back for a week. After the servo's & tank are in there's no room batt & Rx. Ah well, I'll figure it out.

RE: Modeltech Extra ?
 

fitting the components is tricky. Use a JR 7xx series receiver and square 750 mah from radicalrc, as I suggest in my documentation. They both go right in back of the tank with the battery on top of the receiver. If you are running futaba, I don't know what receiver will fit in there.

RE: Modeltech Extra ?
 

Thanks, I'll try to fit a small rx & batt...somewhere over the rainbow...ahhh, excuse me.