e th
 

Please help setting up my panes electronics.
Here is the problem. I get the ailerons working by ail and aux 1 channell. Rudder on rudder channell. Throttle on throttle.
What my problem is that I have 2 servos for my elevator. How can I get it all to work on a jr 7 ch rx and a jr xp6102. Trying to finsih is so i can fly in th e morning.Thanks

RE: e th
 

the 6102 can't do duel elevator servos without a reversing y cord ,one with an adjustable center trim is best

http://www3.towerhobbies.com/cgi-bin...4150&search=Go

RE: e th
 

Well i got it to work by using a simple y harness and switching a servo how 180 deg. Works perefect now. The i adjusted them to the exact same and they are perfect now. As imple turn of the servo horn...

RE: e th
 

You can program the XP 6102 for dual elevators, but you have to Y harness the ailerons. Turn Flaperons off. Then go into the program mode to:

[MX4] > ELE -> FLA

ON OFFSET 0

% % ----- adjust percentages

SW ALWAYS ON

On the reciever I used Elevator plug and AUX1 the reciever is a R790UL

You may not be able to get your elevators to line up exactly on full deflection on a Y harness

That is how I set up my 30% Extra