Please help setting up my panes electronics.
Here is the problem. I get the ailerons working by ail and aux 1 channell. Rudder on rudder channell. Throttle on throttle.
What my problem is that I have 2 servos for my elevator. How can I get it all to work on a jr 7 ch rx and a jr xp6102. Trying to finsih is so i can fly in th e morning.Thanks

the 6102 can't do duel elevator servos without a reversing y cord ,one with an adjustable center trim is best

http://www3.towerhobbies.com/cgi-bin...4150&search=Go

Well i got it to work by using a simple y harness and switching a servo how 180 deg. Works perefect now. The i adjusted them to the exact same and they are perfect now. As imple turn of the servo horn...

You can program the XP 6102 for dual elevators, but you have to Y harness the ailerons. Turn Flaperons off. Then go into the program mode to:

[MX4] > ELE -> FLA

ON OFFSET 0

% % ----- adjust percentages

SW ALWAYS ON

On the reciever I used Elevator plug and AUX1 the reciever is a R790UL

You may not be able to get your elevators to line up exactly on full deflection on a Y harness

That is how I set up my 30% Extra