RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)
-   -   What plane for a Zenoah G20EI? (https://www.rcuniverse.com/forum/arf-rtf-75/7779701-what-plane-zenoah-g20ei.html)

chuck993 07-28-2008 05:43 AM

What plane for a Zenoah G20EI?
 
Anyone have any ideas of a good match for the Zenoah G20EI 20CC gas engine, which airplanes they have had success with?

MinnFlyer 07-28-2008 06:09 AM

RE: What plane for a Zenoah G20EI?
 
I had one in a H-9 Sopwith Camel and an H-9 Hellcat. Both were excellent.

chuck993 07-28-2008 07:30 AM

RE: What plane for a Zenoah G20EI?
 
How was the Hellcat, was it the 60 size? How did it perform? The G20ei is pretty heavy and I had it in a Yak previously, I am concerned with wing loading and not turning the airplane into a lead weight.

MinnFlyer 07-28-2008 09:52 AM

RE: What plane for a Zenoah G20EI?
 
It flew very well with the G20, very scale-like.

here's the review. Check out the video:

http://www.rcuniverse.com/magazine/a...article_id=773

chuck993 07-28-2008 03:05 PM

RE: What plane for a Zenoah G20EI?
 
Actually, looking at the article on the Hellcat and the video, he says the wing loading is too hot with the weight of the engine, which among other things, makes it come in like a brick if you lose power.

warhawk00 08-06-2008 04:03 PM

RE: What plane for a Zenoah G20EI?
 
My H-9 P-47 was a perfect match. Absolutely 0 weight needed for balance. It's a keeper..!

chuck993 08-07-2008 04:19 AM

RE: What plane for a Zenoah G20EI?
 
A 60 size P47 took a 42 oz engine without having to add tailweight???

That is wild. What is the over all weight? This sounds promising.

CLBAKER 09-02-2008 09:13 PM

RE: What plane for a Zenoah G20EI?
 
I put a pair of G-20 engines in my KMP F7F Tigercat and it does great. Lots of power for a 29 pound plane. Make sure you have enough cooling air for the ignition system. I also have one in a 1.20 BalsaNova and it came in at 11.10 pounds

CLBAKER 09-02-2008 09:16 PM

RE: What plane for a Zenoah G20EI?
 
I put a pair of G-20 engines in my KMP F7F Tigercat and it does great. Lots of power for a 29 pound plane. Make sure you have enough cooling air for the ignition system. I also have one in a 1.20 BalsaNova and it came in at 11.10 pounds

SJNason 10-30-2008 09:35 AM

RE: What plane for a Zenoah G20EI?
 


ORIGINAL: chuck993

Anyone have any ideas of a good match for the Zenoah G20EI 20CC gas engine, which airplanes they have had success with?

The Model Tech Dragon lady [link]http://www.hobbypeople.net/gallery/123761.asp[/link]
the Seagull 90 size Extra 260 and the 90 Size yak

daveamt 10-30-2008 12:10 PM

RE: What plane for a Zenoah G20EI?
 
What about a 60 sized ultra/ugly stick? They have fairly large wings, to carry the extra LBS. anyone have any experiences here?

chuck993 10-30-2008 01:07 PM

RE: What plane for a Zenoah G20EI?
 
I have a 60 size ultra stick with a OS 91FS in it, does great, I had the G20ei in a Seagull yak 90, it was ok unless the engine died, then it was a lawn dart, had to add weight in the rear too.


All times are GMT -8. The time now is 09:31 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.