![]() |
anyone make a profile ARF
I am looking for a profile type fun fly plane sort of like the Sig Fazer or the tower fun 51 in an ARF? Anyone know of any out there?
|
anyone make a profile ARF
Check out morris hobbies. They have the top cat and the knife. Both great profiles
http://www.morrishobbies.com |
anyone make a profile ARF
Thunder Tiger did, don't know if they still do.
Aeroworks make a large one. |
anyone make a profile ARF
Goldberg (now Lanier?) has the Extreme 330. It has very large control surfaces and you can get a ridiculous amount of throw. You can make it almost unflyable. I use a Futaba 9c on mine and have triple rates (Relaxing, Hot-dogging, 3-D).
|
anyone make a profile ARF
Aeroworks makes an Extra, I think..
|
anyone make a profile ARF
Thunder tiger still makes them. Price is good. I have two and l am recovering one right now. They use the cheap sticky stuff. But it peels off easy to recover. Besides that, these planes are a hoot. Throw in a 50sx and you got a great second plane for minimal money that you will enjoy flying. Big symmetrical wing, lots of throw, and you can do almost anything with it with in reason. Just make sure you have tight linkages or you will get flutter. And pin the hinges. My original is 3 years old and has the snot flown out of it. Only reason l am covering it is because l banged it moving it.
Cheers |
anyone make a profile ARF
Aeroworks at http://www.aero-works.net/
|
anyone make a profile ARF
I get the point Geistware but, alas l live in Canada. To get one of your great looking profiles l would have to sell my first born to ship it here.
|
anyone make a profile ARF
Originally posted by tlpayne Thunder tiger still makes them. Price is good. I have two and l am recovering one right now. They use the cheap sticky stuff. But it peels off easy to recover. Besides that, these planes are a hoot. Throw in a 50sx and you got a great second plane for minimal money that you will enjoy flying. Big symmetrical wing, lots of throw, and you can do almost anything with it with in reason. Just make sure you have tight linkages or you will get flutter. And pin the hinges. My original is 3 years old and has the snot flown out of it. Only reason l am covering it is because l banged it moving it. Cheers |
anyone make a profile ARF
The C of G is 4 1/4" to 4 3/4" back from LE. I ended up all the way to 4 3/4" But l would suggest the intial flight at 4 1/4" and work your way up.
Cheers PS. Just to make sure you understand, l am talking about the thunder tiger arf/arc fun tiger. Hate to see you put this CofG on the wrong plane. |
anyone make a profile ARF
I like the looks of the profiles from extremeflight r/c....
check them out http://www.extremeflightrc.com/XFRC-Products.htm |
anyone make a profile ARF
Aero works is still my choice. A buddy is going through the states this summer and l hope bringing one back for me.
|
anyone make a profile ARF
Originally posted by tlpayne The C of G is 4 1/4" to 4 3/4" back from LE. I ended up all the way to 4 3/4" But l would suggest the intial flight at 4 1/4" and work your way up. Cheers PS. Just to make sure you understand, l am talking about the thunder tiger arf/arc fun tiger. Hate to see you put this CofG on the wrong plane. |
| All times are GMT -8. The time now is 03:53 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.