help
05-05-2007 | 07:28 PM
#1
Thread Starter
Junior Member
Joined: May 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
From: London,
ON, CANADA
help
Does anyone have one of these chargers or know anything about them. I have read the instructions but find them difficult to understand. It looks as though it can charge up to 30 Ni-Cad/Ni-MH or 11 Li-Po's. I'm also under the impression that it is totally automatic. Please advise.
TIA
TIA
05-06-2007 | 12:19 AM
#3
Thread Starter
Junior Member
Joined: May 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
From: London,
ON, CANADA
RE: schulze isl 6-330 d charger help
Is it automatic? I set it to "auto dc" with my 11.1v 1300mAh lipo, and it was discharging below 9v when I ended the discharge myself for fear it was going to go too far. Any idea what happened or was this ok?
05-06-2007 | 05:33 PM
#4
RE: schulze isl 6-330 d charger help
"auto dc" is automatic discharge. It will take LiPo down to 3 volts per cell. Don't know why it went below 3v per cell. You might email Schulze. I use my alot and never had problem.
