Tx lipo problem
 

When using a 3s 1600mAh battery in the Tx the Rx loses connection and sends the ESC/Motor into warm up mode. it also happens when the stick on the radio is just slightly bumped or when I retract the flaps. Did I damage the radio by switching to Lipo? The item description said they were OK to use in my brand of radio. Any Help?

Solved problem was not Tx battery.

So what was the cure?

I was using a 4s battery on the Rx side for the ESC/Motor/Servos and apparently it was to much. The problem went away as soon as I switched back to a 3s 11.1v. The small mini servos I'm using for aileron's must be incompatible. I was stumped actually, the esc says it's rated to 4s and the servos should get the same 2A must be leakage.