RCU Forums - polyquest charging

RCU Forums (https://www.rcuniverse.com/forum/)

- Batteries & Chargers (https://www.rcuniverse.com/forum/batteries-chargers-84/)

- - polyquest charging (https://www.rcuniverse.com/forum/batteries-chargers-84/3544153-polyquest-charging.html)

Mayday!Mayday!

11-11-2005 09:31 PM

polyquest charging

Hello All, I have a 20c 3s 2100mAh Polyquest lipo and the guy at the LHS told me I can charge it on the discharge side no problem. I was told only to charge on the pcm side and only with a pcm adapter for polyquest. Has anyone charged on the discharge side? Would it be ok to do so? Sorry for the questions just want my ducks in a row. Thanks for the help.

Trogdor the Burninator

11-12-2005 05:31 AM

RE: polyquest charging

Anyone who has charged a lipo without a balancer circuit or other gizmo has charged through the discharge side... perfectly fine. Maybe a bit better using their attachment because it'll keep individual cells in the proper voltage range but certainly not mandatory.

Red Scholefield

11-12-2005 07:13 AM

RE: polyquest charging

1 Attachment(s)

Quote:

ORIGINAL: Trogdor the Burninator

Anyone who has charged a lipo without a balancer circuit or other gizmo has charged through the discharge side... perfectly fine. Maybe a bit better using their attachment because it'll keep individual cells in the proper voltage range but certainly not mandatory.

Balancer circuit can be easily replicated by making up a balancing jig to enable you to check the voltage of each cell and charge if necessary to bring it into balance.
Pure Hobby www.purehobby.com offers the multi-pin connector that Polyquest uses and the one to mate with it.

All times are GMT -8. The time now is 09:10 AM.