nitro to electric
#1
Thread Starter

Joined: Feb 2006
Posts: 3,657
Likes: 0
Received 0 Likes
on
0 Posts
From: elkton,
MD
hey all. not sure where to post this, but.
i have a avistar that i want to make electric. i need to know what motor esc set-up would work and what size batts. thanks
i have a avistar that i want to make electric. i need to know what motor esc set-up would work and what size batts. thanks
#2

My Feedback: (-1)
At the bottom of the header bar is a site called wattflyer.com Just go there and click it on. Everything you ever wanted to know about electric power. I have some charts for converting but you better be up on your math if you want to use them. I get all my electric info at the WF forum
#3
Gray Beard has definitely steered you in the right direction. The search button turned up this resource too, along with several other threads of people who have done an electric conversion of the Avistar.
http://www.rcuniverse.com/forum/m_90...tm.htm#9019864
http://www.rcuniverse.com/forum/m_90...tm.htm#9019864
#4

My Feedback: (1)
You can also do some of your own estimates by using the chart shown in the sticky at the top of the Beginners Forum. Click on that thread and go down a few postings. The info there was taken from the Wattflyer website.
http://www.rcuniverse.com/forum/m_10386274/tm.htm
CGr
http://www.rcuniverse.com/forum/m_10386274/tm.htm
CGr



