Go Back  RCU Forums > RC Airplanes > Beginners
 Beginner Tips >

Beginner Tips

Notices
Beginners Beginners in RC start here for help.

Beginner Tips

Old 04-27-2004 | 01:56 PM
  #1  
Thread Starter
Senior Member
 
Joined: Mar 2004
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
From: Winston-Salem, NC,
Default Beginner Tips

Seems to me that there are a lot of newcomers to the hobby. Welcome to the addiction!

If you read a lot of the posts on here, you will see a lot of people giving some variation of the following advice:

1) Get an instructor. Not only for learning to fly (which is very important by itself), but also for answers to common questions like balancing the plane, starting the engine, break-in, etc. If you have a good instructor, they should be able to help you not only with learning to fly, but also learning the other parts that you need to know. Also they are a good source of advice on 2nd planes, repairing your plane, etc.

2) Join a club. This can be very important for keeping a flying site. Our club flys at a city park and has its meetings at a city recreation center. Every month, someone from the city "just happens to" peek their head in the door to see how many people are there. If only 3 or 4 people came to the meeting, that shows the city that shutting down the park for RC would not affect them that much, as not many voters are using it for RC anyway. Plus, the people you meet in the club. You will get to a point that flying by yourself can be boring without other like-minded addicted guys to talk to.

3) Support your LHS (local hobby shop). They can be some of the most knowledgeable people you will run into. They go to the trade shows, know the manufacturer rep, etc. If you get friendly with the airplane guy at the shop, he can guide you also. The shop will not carry junk (at least mine will not). The manager of my LHS has been flying for 20 years. He will not carry anything that he would not want in his own hangar.

I hope this helps everyone that is getting into this hobby. I am not knocking RCU by leaving them out of the above list. RCU can be a great source of information. But when someone says they cannot get their engine tuned properly, it is hard to diagnose the problem without hearing the engine.
Old 04-27-2004 | 01:58 PM
  #2  
Senior Member
 
Joined: Aug 2002
Posts: 2,218
Likes: 0
Received 0 Likes on 0 Posts
From: Jewett, NY,
Default RE: Beginner Tips

Nebbie on 1 & 2 agree 100% on 3 it would depend on the LHS

My advice is talk to the guys at the club they will be able to tell you which Lhs are worth going to and which are not
Old 04-27-2004 | 02:15 PM
  #3  
Thread Starter
Senior Member
 
Joined: Mar 2004
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
From: Winston-Salem, NC,
Default RE: Beginner Tips

Crashem, you are correct. I assumed a LHS that is worth going to. Each hobby shop I have gone to seem to "specialize" in some areas to the detriment of others. My preferred LHS is great for RC in general and Airplanes in particular, but poor for model railroading. The point that I was trying to make is that if everyone purchases off the internet rather than from a LHS, they will go away. Just like the home improvement super stores did to the mom and pop hardware stores.
Old 04-27-2004 | 07:18 PM
  #4  
jboy381-RCU's Avatar
Senior Member
 
Joined: Oct 2002
Posts: 977
Likes: 0
Received 1 Like on 1 Post
From: Creedmoor , NC
Default RE: Beginner Tips

#1 tip...keep the wheels on the bottom,and the wings on top

john

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.