ripmax tiger moth engine mount
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: Middlesbroughcleveland, UNITED KINGDOM
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ripmax tiger moth engine mount
Have just got ripmax tiger moth ARTF as second plane. Had a spare SC 25 2 stroke and SC 30 4 stroke and info says 25 to 38 2 stroke for model. Found that both engines are to small for the ply engine mount. The gap that the engine is supposed to fit in is to large for both engines. Anyone else had this problem.
Also supplied piano wire for elevator and rudder snaps when you try to create z bend to brittle
Also supplied piano wire for elevator and rudder snaps when you try to create z bend to brittle