GP Patty, need help.......programing
04-16-2005 | 03:22 PM
#1
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: Swan Hills,
AB, CANADA
GP Patty, need help.......programing
I am trying to program my Great Planes Patty Wagstaff and I am having trouble.
I am using a Futaba 9C and a Hitec 7 channel receiver, can this be done?
Even if I "Y" the ailerons is still do not have enough channels, do I?
Or can it be done?
I am using a Futaba 9C and a Hitec 7 channel receiver, can this be done?
Even if I "Y" the ailerons is still do not have enough channels, do I?
Or can it be done?
04-16-2005 | 06:36 PM
#2
Senior Member
My Feedback: (118)
Joined: May 2004
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
From: Mission,
TX
RE: GP Patty, need help.......programing
Flyboy
How many servos are you using and what are they set up to control?
I set mine up originally using a Futaba 127 7-channel & a 9CAP. My setup was:
2 channels for Aileron
2 channels for Rudder
2 channels for Elevator
1 channel Throttle
It flew just fine. I subsequently changed to 8-channel PCM and also added a choke servo. The TX is now a 9ZAP.
Safe Flying!
How many servos are you using and what are they set up to control?
I set mine up originally using a Futaba 127 7-channel & a 9CAP. My setup was:
2 channels for Aileron
2 channels for Rudder
2 channels for Elevator
1 channel Throttle
It flew just fine. I subsequently changed to 8-channel PCM and also added a choke servo. The TX is now a 9ZAP.
Safe Flying!
