Go Back  RCU Forums > RC Airplanes > Beginners
 Propeller questions >

Propeller questions

Community
Search
Notices
Beginners Beginners in RC start here for help.

Propeller questions

Thread Tools
 
Search this Thread
 
Old 06-12-2005 | 03:07 PM
  #1  
Thread Starter
Member
 
Joined: Jan 2005
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
From: Stillwater, MN
Default Propeller questions

Hello,

I was wondering what a prop that has higher numbers means compared to smaller numbered props? For an example, I have a 5 x 5 prop, and I also have a 6 x 3 prop. Which numbers represent thrust or power and which number represents speed?
Would the 6 x 3 perform better on a 400 motor then a 5 x 5?

Any info would be very helpful, thank you ;o)

Old 06-12-2005 | 03:19 PM
  #2  
RCKen's Avatar
RCU Forum Manager/Admin
My Feedback: (9)
 
Joined: Jul 2002
Posts: 28,245
Likes: 0
Received 31 Likes on 27 Posts
From: Lawton, OK
Default RE: Propeller questions

bookstar75,
I'll use the 6x3 prop that you mentioned as an example. The first number (6 in this case) represents the size of the prop. It is the diameter of the prop. The prop in our example is 6 inches in diameter. The second number (3 in this case) is the pitch of the prop. In theory the pitch represents how far the prop will move with each turn of the prop. The prop in our example has a pitch of 3, meaning that it will move forward 3 inches for every rotation of the prop.

Unfortunately there is no set prop to use in every circumstance. It can take some experimentation to find what works best with our plane/engine combination. But there are some rules that will help you find which prop to use. The higher the pitch the faster the plane will more. The lower the pitch the more power the plane will have, power is most noticed when you pull vertical. Unfortunately you lose one to get the other.

Hope this helps

Ken
Old 06-13-2005 | 07:02 AM
  #3  
Senior Member
 
Joined: Jul 2002
Posts: 3,770
Likes: 0
Received 2 Likes on 2 Posts
From: Spartanburg, SC
Default RE: Propeller questions

Given, for example, a 10 x 6 prop, the first number is the diameter in inches (10"). The second number is the pitch. That is the distance in inches (6) that the prop will move through a solid surface in one revolution. This is theoretical, since the prop will slip in the air. GIVEN THE SAME RPM, more pitch, less diameter equals more speed, less pull. Larger diameter, less pitch gives more pull and less top speed.

Dr.1
Old 06-13-2005 | 07:23 AM
  #4  
exeter_acres's Avatar
Senior Member
My Feedback: (2)
 
Joined: Sep 2004
Posts: 7,457
Likes: 0
Received 0 Likes on 0 Posts
From: Johns Creek, GA
Default RE: Propeller questions

so...now that the above posts answered the question....

What plane are you working on? it may help others give suggestions for you.....

it also may take a little experimentation...

I tried several different props on my Zagi with a MEga 16/15 4 brushless motor,,, the 5 x 5 to the 6 x 4 were all within the proper range for amp draw, but I just like the way it flies better with a 5.5 x 4.5 prop......

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.