Newbie Park Flyer Help Please
07-24-2005 | 07:26 PM
#1
Thread Starter
Junior Member
Joined: Dec 2004
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: , AL,
Newbie Park Flyer Help Please
Hi Everyone,
Needing some, actually a lot of advise on a 3d park flyer. I have been flying helis for a couple years now and want a 3d park flyer. I have never flown an electric plane before but have put in a good bit of sim time in. I am interested in Great Planes YAK 55 3d partially because of no landing gear. Can some one help with a setup for this plane or any other suggestions about this plane. Any would be appreciated. I have a 9c radio and lipo charger but that is it I would need everything else. Thanks for any help.
Needing some, actually a lot of advise on a 3d park flyer. I have been flying helis for a couple years now and want a 3d park flyer. I have never flown an electric plane before but have put in a good bit of sim time in. I am interested in Great Planes YAK 55 3d partially because of no landing gear. Can some one help with a setup for this plane or any other suggestions about this plane. Any would be appreciated. I have a 9c radio and lipo charger but that is it I would need everything else. Thanks for any help.
07-24-2005 | 08:46 PM
#3
RE: Newbie Park Flyer Help Please
I have flown Suitcase's Extreme Flight Yak and his Ultra RC Edge 540. We land both without the gear with no problem. Check out the 3dBuddy from Ulrta RC for $174.95. It comes with brushless motor,speed controller and gearbox. I have also been using a 5 channel Berg reciever in my Tantrum 3D with good results and Hitec 55 servo's.
Here is the link for the 3DBuddy http://www.ultra-rc.com/3dbuddyoriginal/index.htm
Here is the link for the 3DBuddy http://www.ultra-rc.com/3dbuddyoriginal/index.htm
