mig-3 woes....
09-05-2005 | 12:44 AM
#1
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 968
Likes: 0
Received 0 Likes
on
0 Posts
From: College Station,
TX
mig-3 woes....
i maidend my foam mig 3 today......well tried.
Im afraid i may have been using a poor choice for a prop(master airscrew 8X3), but it all the LHS had in an apropriate size
The plane is flying with a bp-21 outrunner, and a 3-cell pack.
I just dont know what was going wrong today.....we launched it into the wind, and it jumped all over the place. first time. it tip staled right into the ground. second time, it starteed flying okay, and i couldnt get it to turn all of a sudden and had to force it down(my space was limited....) It ripped a wire out of the motor, so im waiting to get it resoldered on. to tell you the truth, im a little nervous about flying it again, because its so finicky. anyone have an idea why it might be stalling out so badly, and why its jumping and bumping all over the place when i fly it?
Im afraid i may have been using a poor choice for a prop(master airscrew 8X3), but it all the LHS had in an apropriate size
The plane is flying with a bp-21 outrunner, and a 3-cell pack.
I just dont know what was going wrong today.....we launched it into the wind, and it jumped all over the place. first time. it tip staled right into the ground. second time, it starteed flying okay, and i couldnt get it to turn all of a sudden and had to force it down(my space was limited....) It ripped a wire out of the motor, so im waiting to get it resoldered on. to tell you the truth, im a little nervous about flying it again, because its so finicky. anyone have an idea why it might be stalling out so badly, and why its jumping and bumping all over the place when i fly it?
