servos for ultrasport+ 40
#3
Senior Member
Join Date: Feb 2006
Location: Poland,
OH
Posts: 3,204
Likes: 0
Received 0 Likes
on
0 Posts
RE: servos for ultrasport+ 40
Hitec flight packs are pretty good and are compatable with all the major radio systems (Futaba,hitec,JR,Airtronics)
http://www2.towerhobbies.com/cgi-bin...&I=LXUZ91&P=ML
If all you need are servos I believe they give a discount on 3 (if I remember correctly)
http://www2.towerhobbies.com/cgi-bin...&I=LXUZ91&P=ML
If all you need are servos I believe they give a discount on 3 (if I remember correctly)
#5
Senior Member
Thread Starter
Join Date: Feb 2006
Location: Concord,
MA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
RE: servos for ultrasport+ 40
Oops, I forgot about this thread. THanks all. Ok... out of these two servos what would u recommend. Price is close enough that I don't care.
Hitec 475HB.
Higher torque, .2 oz lighter but .03 seconds slower and single bb
http://www2.towerhobbies.com/cgi-bin...?&I=LXDEM1&P=0
Hitec 425BB
Lower torque, .2 oz heavier, .03 seconds faster and dual bb
http://www2.towerhobbies.com/cgi-bin...?&I=LXN586&P=0
Thanks
-John
Hitec 475HB.
Higher torque, .2 oz lighter but .03 seconds slower and single bb
http://www2.towerhobbies.com/cgi-bin...?&I=LXDEM1&P=0
Hitec 425BB
Lower torque, .2 oz heavier, .03 seconds faster and dual bb
http://www2.towerhobbies.com/cgi-bin...?&I=LXN586&P=0
Thanks
-John
#8
My Feedback: (85)
RE: servos for ultrasport+ 40
I run Futaba 3003 on everything but the elevator and a 3004 on the elevator. I have a Magnum 70 four stroke in mine and have no flutter or any bad habits whatsoever. In fact this weekend i flew it in a pattern contest in the advanced class and managed to win two rounds with it. Nice plane in my humble opinion.
Dennis
Dennis