Lets see your work Area
#1
Thread Starter
Member
Joined: Sep 2006
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
From: Scranton,
PA
well Ive been flying for about 3 weeks, Ive soloed and have been helping my dad build his plane. My next plane is a tiger 60 that I havent started yet. I just wanna see some work stations, heres mine.
#3

JR16 - too big, too neat and not nearly enough clutter. It appears you will have no problem finding stuff. That is no way to build a plane. You MUST start with a mess and keep it that way at all times.
#4
RCU Forum Manager/Admin
My Feedback: (9)
ORIGINAL: bruce88123
JR16 - too big, too neat and not nearly enough clutter. It appears you will have no problem finding stuff. That is no way to build a plane. You MUST start with a mess and keep it that way at all times.
JR16 - too big, too neat and not nearly enough clutter. It appears you will have no problem finding stuff. That is no way to build a plane. You MUST start with a mess and keep it that way at all times.


Ken
#5
Ok heres my work area, if you think this is messy you should see it when i'm building a balsa plane. Don't worry i used to have a nice clean work bench too, the mess builds over time!
#11
Senior Member
Joined: Oct 2006
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
From: Incirlik, TURKEY
ORIGINAL: Kaos1964
Here's mine - after 30-ish years in the hobby I've finally got it!!

Here's mine - after 30-ish years in the hobby I've finally got it!!

#12

My Feedback: (1)
Yeah, troposcuba, I have to agree with ya, however, I believe that it is all a fantasy. Notice that there are no completed planes haning around, against the wall, hanging from the ceiling, broken parts in trash cans, none of that. I think it's actually a prop for Home Depot or Lowes or something..
#17
RCU Forum Manager/Admin
My Feedback: (9)
ORIGINAL: MinnFlyer
I don't have a "Work Area"
I have [link=http://www.minnartist.net/RCU/grafix/manland.wmv]MANLAND[/link]
I don't have a "Work Area"
I have [link=http://www.minnartist.net/RCU/grafix/manland.wmv]MANLAND[/link]


But Mike, you definitely do need to do something about the encrouchment into ManLand from GirlWorld. If left unchecked it will continue to spread and eventually take over ManLand!!!!! [X(]
Ken
#19
ORIGINAL: MinnFlyer
I don't have a "Work Area"
I have [link=http://www.minnartist.net/RCU/grafix/manland.wmv]MANLAND[/link]
I don't have a "Work Area"
I have [link=http://www.minnartist.net/RCU/grafix/manland.wmv]MANLAND[/link]
#20

My Feedback: (1)
A video of my work room would look very similar to a hand grenade going off about 10 minutes before taking the video. That would allow the smoke to settle and probably would imporve what it looks like now. 
No manland here. I live in a townhouse with no garage so I have to make due with my spare bedroom. Good thing I'm single!!! ha..

No manland here. I live in a townhouse with no garage so I have to make due with my spare bedroom. Good thing I'm single!!! ha..
#24
Not so much ManLand as a GuyCave. Nice big 350# 4' x 8' heavy table (oak with asphault/linoleum top) and side shop for metal work. Not shown are two tables I use for charging space and storage for the mostly flyable models.
#25

Not bad for a Yankee basement.
Dig that deep around here and you get water though. Always felt cheated that I didn't get a basement with my house, like half is missing. No usable attic space either. Just a little bit of storage space and utilities. Had a full basement in Detroit at parents home there and that was nice.
Dig that deep around here and you get water though. Always felt cheated that I didn't get a basement with my house, like half is missing. No usable attic space either. Just a little bit of storage space and utilities. Had a full basement in Detroit at parents home there and that was nice.



