I have a hanger 9 easy fly 40 i have been lugging around for the last 12 years hopping i would get back into the hobby. I finally am getting back into the hobby and have noticed in the multiple moves since i last flew the plane i have misplaced the wings. This is the old blue and white version and was originally an ARF. I was wondering if anyone had plans for the wings or had one and could give me enough of the dimensions/photos that i could recreate them. Also if anyone has a full Manuel for this plane i would be interested in that too as i need to replace the control arms in the aft part of the plane as well. anyway if you can help at all i would greatly appreciate it.

On a side note I have also located my plans for my Goldberg Eagle 2 kit. Unfortunately this is all i can locate if someone has a copy of the plans i would appreciate it. I have the plane that i purchased in 1992 so the older plans would probably fit my instructions better.

Any help would be appreciated and am entering winter build repair mode...

I'm not sure about this particular plane, but many offer a 'wing kit' that you can buy as a replacement. You may wish to check the various vendors, Horizon Hobby, Tower Hobby, for instance, to see if they would carry such a replacement.

CGr.

i have checked hanger 9's site directly, but they no longer offer my version of this plane, guess they changed the design sometime in the last 12 years it happens, but i will check the other sites ty

I have a easy fly 40 that is in great condition, i actually just put the kit together 3months ago flew it 9times

I have an older easy fly. I still have the manual also. Give me an address where to e mail to and i'll get you specs on the wing and info from the manual.The manual is just assembly info. So probably all you need is throw settings? Let me know and I'll forward info to you.

that's great thank you very much my e-mail address is [email protected]

i also have a easy fly 40 that i got in 4th grade i am 22 now and i just starter flying it 6 mounth ago sadly i never replaced the TX battery and the E-Servo reversed and i went into the ground and i now started rebulding it all most done i did some mods on it added flaps and putting floats on it with a Magnum XL-70RFS 4-Stroke the only thing i need is the C.G. and i cant seem to find my manual Any help would be appreciated