My ultimate 120 pic not finnished (pic)
08-01-2009, 12:05 PM
#5
Member
Thread Starter
Join Date: Apr 2009
Location: IPSWICH MASS / SOUTH BOSTON ,
MA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: My ultimate 120 pic not finnished (pic)
Hey opjose , thanks for the help and info for this build greatly appreciated . Its going well , a little slow though . Never thought about the color coordination of the engine to the plane, now that I look at it , it does go well with it . Went to LHS and got all the little things to finnish her up , got home forgot to get the servo extensions for ailerons , never seems to fail I always forget 1 thing , I even had it on my list . added another view of it
08-01-2009, 11:38 PM
#7
Join Date: Nov 2005
Location: Poolesville, MD
Posts: 12,624
Likes: 0
Received 0 Likes
on
0 Posts
RE: My ultimate 120 pic not finnished (pic)
Have you worked with Saito's before?
If not be aware that the LS needles tend to come set bluberlingly rich.
And the engine will seem to run this way fine, although you will find it hard to get a good slow idle at first... because it is so rich.
I cranked in my Saito's LS needle almost 11 complete turns ( much to my amazment the engine ran 11 turns out just fine! ) before I got a good slow idle after breakin.
If not be aware that the LS needles tend to come set bluberlingly rich.
And the engine will seem to run this way fine, although you will find it hard to get a good slow idle at first... because it is so rich.
I cranked in my Saito's LS needle almost 11 complete turns ( much to my amazment the engine ran 11 turns out just fine! ) before I got a good slow idle after breakin.
08-02-2009, 12:03 PM
#8
My Feedback: (-1)
RE: My ultimate 120 pic not finnished (pic)
ORIGINAL: opjose
Have you worked with Saito's before?
If not be aware that the LS needles tend to come set bluberlingly rich.
And the engine will seem to run this way fine, although you will find it hard to get a good slow idle at first... because it is so rich.
I cranked in my Saito's LS needle almost 11 complete turns ( much to my amazment the engine ran 11 turns out just fine! ) before I got a good slow idle after breakin.
Have you worked with Saito's before?
If not be aware that the LS needles tend to come set bluberlingly rich.
And the engine will seem to run this way fine, although you will find it hard to get a good slow idle at first... because it is so rich.
I cranked in my Saito's LS needle almost 11 complete turns ( much to my amazment the engine ran 11 turns out just fine! ) before I got a good slow idle after breakin.
Dang fine looking plane!!! Also perhaps the best flying stunt Bipe I have ever flown. I love the ULTs!!
