R700
 

I have a JR r700 reciever. When I plug in the rudder channel the servo twitches and the throws are jumpy. I tried all the other channels and different servos and it seems to be just that channel. Is this a common thing? Is it ready for the trash? Any advice is appreciated thanks.

Seth

RE: R700
 

did u check the battery?

RE: R700
 

I agree, check your battery. I have the R700 in my LT40, and it performs flawlessly.

RE: R700
 

If the battery is OK, I'd contact JR. Has the rx been in a crash? If so, send to back to JR for a check -up.

RE: R700
 

It was in a crash about a year ago. But it worked fine up until today. I am charging the bat in hopes that is all it is.

Seth

RE: R700
 

Anytime an rx is in a crash you should have it checked. There can be internal problems waiting to bite you during flight. Is your plane worth it?

RE: R700
 

Does it do it with the transmitter on? If not its okay, I have three and they all do it with the transmitter off, but are solid with the transmitter on.