RCU Forums - wing servos

RCU Forums (https://www.rcuniverse.com/forum/)

- Beginners (https://www.rcuniverse.com/forum/beginners-85/)

- - wing servos (https://www.rcuniverse.com/forum/beginners-85/3493191-wing-servos.html)

jasonlacey

10-26-2005 06:33 PM

wing servos

world models clipped wing cub,my first build in many a year.The problem i have is that the jr servo 537 is to short for the cut out in the wing only two fixing holes sit over the balsa of the wing,do i glue a piece in or put a plate under the servo, which would raise it up maybe to much? any ideas would be most welcome,

2slow2matter

10-26-2005 07:33 PM

RE: wing servos

Glue another stick across the opening so that the servo fits snug--an easy fix!!!

MinnFlyer

10-26-2005 07:35 PM

RE: wing servos

1 Attachment(s)

Glue a piece of ply under the opening, and then fill in the gap with balsa that is the same thickness as the wing sheeting

All times are GMT -8. The time now is 10:24 AM.