RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Beginners (https://www.rcuniverse.com/forum/beginners-85/)
-   -   11x6 to 10x6 (https://www.rcuniverse.com/forum/beginners-85/564136-11x6-10x6.html)

spooner 02-17-2003 03:19 AM

11x6 to 10x6
 
what will i gain if i go from the 11 to the 10 if anything ? thanks for the help. spooner :)

Flyfalcons 02-17-2003 03:39 AM

11x6 to 10x6
 
Engine RPM. Whether or not that transfers to better performance depends on which engine it is attached to and what plane the engine is bolted to.

spooner 02-17-2003 03:58 AM

11x6 to 10x6
 
oh sorry its the hanger9 alpha with the evu .46 .. air speed should stay the same?

Flyfalcons 02-17-2003 04:06 AM

11x6 to 10x6
 
If your .46 has good power then you may lose a little airspeed because you would be underpropping the engine. Whether or not you would notice it is doubtful, but you might notice a decrease in climb performance.

Homebrewer 02-17-2003 04:31 AM

11x6 to 10x6
 
Your airspeed will probably increase due to the fact that your 10x6 prop will spin much higher revs than the 11x6 prop.

Personally, I rather use a 10x7 or a 11x5 prop with a .46 engine.

FLYBOY 02-17-2003 03:55 PM

11x6 to 10x6
 
I like 10 inch props on .46. I would think you would loose performance in every aspect with an 11.


All times are GMT -8. The time now is 07:12 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.