|
Reciever slots
Does the Receiver that comes with the RTF Hangar 9 Alpha 60, have an extra slot in the receiver. Im asking because Im getting one of the voltwatch things, and it requires a slot. I need to know If I need a Y-harness to hook it in the batt. slot with the battery.
|
RE: Reciever slots
You can hook that to any empty slot in the receiver. If all of the channel slots are full you can hook it in with a Y-harness, like you said in your post.
Ken |
RE: Reciever slots
rc ken is right on again
|
RE: Reciever slots
What would we do without him?
|
RE: Reciever slots
The Alpha 60 comes with a JR 700 Receiver. 7 Channels. You will have two slot vacant, I think.
|
RE: Reciever slots
ORIGINAL: MinnFlyer What would we do without him? Ken |
RE: Reciever slots
did anyone buy the RTF version, so i can know for sure. thanks
|
RE: Reciever slots
Shortymet55,
The manual for this RTF package is available online, so you can read through it yourself. You can find the manual here; [link]http://www.hangar-9.com/ProdInfo/Files/han2600-manual.pdf[/link] But to answer your question. The receiver that comes with this package is the [link=http://www.horizonhobby.com/Products/Default.aspx?ProdID=JSP30600]JR RS600[/link] , 6 channel receiver. This means there are 6 "slots" in the receiver. You will only need 4 of those for the servos in this trainer (1 aileron servo, 1 rudder servo, 1 elevator servo, and 1 throttle servo), plus 1 for the battery connection for a total of 5. This leaves one empty channel/slot in which you can plug your VoltWatch in to. So you will not need a Y-harness Hope this helps Ken |
RE: Reciever slots
you've been told for sure
|
RE: Reciever slots
Thanks alot RC Ken. Ive already looked through the entire manual, but just a skim, so i must of missed that. Thanks
|
RE: Reciever slots
ORIGINAL: MinnFlyer What would we do without him? |
RE: Reciever slots
ORIGINAL: RCKen ORIGINAL: MinnFlyer What would we do without him? Ken |
RE: Reciever slots
ORIGINAL: bruce88123 ORIGINAL: RCKen ORIGINAL: MinnFlyer What would we do without him? Ken Ken |
RE: Reciever slots
ORIGINAL: RCKen Shortymet55, The manual for this RTF package is available online, so you can read through it yourself. You can find the manual here; [link]http://www.hangar-9.com/ProdInfo/Files/han2600-manual.pdf[/link] But to answer your question. The receiver that comes with this package is the [link=http://www.horizonhobby.com/Products/Default.aspx?ProdID=JSP30600]JR RS600[/link] , 6 channel receiver. This means there are 6 "slots" in the receiver. You will only need 4 of those for the servos in this trainer (1 aileron servo, 1 rudder servo, 1 elevator servo, and 1 throttle servo), plus 1 for the battery connection for a total of 5. This leaves one empty channel/slot in which you can plug your VoltWatch in to. So you will not need a Y-harness Hope this helps Ken |
RE: Reciever slots
Bruce,
Indeed you are right. I stand corrected. There are 7 slots/channels available. Ken |
RE: Reciever slots
to-le-do heck ill carry the bags
|
RE: Reciever slots
I may carry the bags, but the Tony Packo's are on Minn!!! ;) :D:D
Ken |
| All times are GMT -8. The time now is 07:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.