Servo's not moving on double servo wing
 

I have a dual aileron servo setup (Super Skybolt) on my Hitec Eclipse 7. The left aileron is not moving with stick input but is with the VR knob. I have the right aileron on channel 1 and the left aileron on channel 6. I have another Hitec Eclipse 7 that I used to trouble shoot the problem and it works fine with the other tx. Any suggestion?? I switched the right and left servos on the rx and the problem remained consistant. With the switch, the right aileron didn't move and the left one did?

thanks,,,,,,

RE: Servo's not moving on double servo wing
 

Tou have not got the mixing setup in the TX.

Cheers

RE: Servo's not moving on double servo wing
 

I got it. The flaperon channel 6 mix was not turned on. Thanks RCU. ;)