I have a dual aileron servo setup (Super Skybolt) on my Hitec Eclipse 7. The left aileron is not moving with stick input but is with the VR knob. I have the right aileron on channel 1 and the left aileron on channel 6. I have another Hitec Eclipse 7 that I used to trouble shoot the problem and it works fine with the other tx. Any suggestion?? I switched the right and left servos on the rx and the problem remained consistant. With the switch, the right aileron didn't move and the left one did?

thanks,,,,,,

Tou have not got the mixing setup in the TX.

Cheers

I got it. The flaperon channel 6 mix was not turned on. Thanks RCU.