![]() |
How to apply monocote?
Is there an adhesive spray or is it "peel and stick"? Also is it heat shrink to get it real tight?
|
RE: How to apply monocote?
RCU member MinnFlyer has done some great how-to articles and videos on covering. check them out as they will go a long way to getting you started.
[link=http://www.rcuniverse.com/magazine/article_display.cfm?article_id=67] Minnflyer Covering how-to [/link] [link=http://www.rcuniverse.com/magazine/article_display.cfm?article_id=726] Minnflyer, Another Look at Covering[/link] Ken |
RE: How to apply monocote?
Do you have about 20 minutes? If so go to the folowing link and watch the videos... They are outstanding (Credit to our very own MinnFlyer)
http://www.rcuniverse.com/magazine/a...article_id=726 |
RE: How to apply monocote?
Ken, you have all this stuff ready for cut and paste don't you...:D
|
RE: How to apply monocote?
ORIGINAL: Mr67Stang Ken, you have all this stuff ready for cut and paste don't you...:D Don't worry, not better planning... Just lazy!!!!!! :D Ken |
RE: How to apply monocote?
Thanks for the quick reply Ken, very informative.
|
RE: How to apply monocote?
Wait till you see the project Ken and I are working on now.
We spent a week together building a trainer - and video taped the whole thing! I'm still editing the videos, and so far there's almost 3 hours worth! |
RE: How to apply monocote?
I assume you will not be able to post this new video Minn? How does one get a copy?
|
RE: How to apply monocote?
ORIGINAL: Mr67Stang I assume you will not be able to post this new video Minn? How does one get a copy? Mike and I really had a blast building the trainer this summer. It's kind of fun to stop with more advanced planes and step back to the roots of how we all get started in the hobby!!! Both of us were like a couple of new guys right after their solo flight when we flew the trainer. Just a couple of big kids with huge silly grins on our faces!!!! :D:D Ken |
RE: How to apply monocote?
I have the video from Monokote showing how to apply it. The video was given to me be a RCU member and, having watched it several times, I'd be happy to send it off to you. Not better than the videos created by the RCU members but worthwhile in its own right.
If you can get me your mailing address, either e-mail or pm, I'll be happy to send it to you. Part of the RCU "Pass It Forward" program. Frank aka Fishin Geezer |
RE: How to apply monocote?
ORIGINAL: Fishin Geezer Part of the RCU "Pass It Forward" program. Frank aka Fishin Geezer |
RE: How to apply monocote?
Thanks, Bruce. I'm a newcomer with lots to learn.
Frank |
RE: How to apply monocote?
No problem, just trying to clarify.
|
| All times are GMT -8. The time now is 10:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.