Will this cause a problem?
 

You can see in the pic that the rudder is bowed/arched just a bit. Other than having to adjust the trim for it and causing a bit of drag, will it cause any major problems?

RE: Will this cause a problem?
 

I've got planes way crookeder than that. Go for it.

RE: Will this cause a problem?
 

No problem

RE: Will this cause a problem?
 

I want to see the WHOLE plane Brett!

RE: Will this cause a problem?
 

I have a Yak with a rudder trailing edge with multiple bows. I tried getting them out by pulling and re-shrinking the covering nut finally gave up. It's not perfect but flies fine.

RE: Will this cause a problem?
 

you'll be absolutely fine I've flown planes all crooked and bent up haha

RE: Will this cause a problem?
 

Just trim it out in the air, you should be fine!

RE: Will this cause a problem?
 

Patience, patience.:D

I just completed the wing tonight, my first ever flap and retract set up. The door setup isn't the greatest on this thing, the wing is curved and the doors are flat.[>:]

RE: Will this cause a problem?
 

I've got planes worse then that, once you get it trimmed out it will be fine

RE: Will this cause a problem?
 

Looks like about 2 clicks of right rudder trim and you would be good to go. Good luck!

RE: Will this cause a problem?
 

Brett,


Is that an Airbus rudder ? jk,

Trim it in flight, should be fine.

Bob