RCU Forums - Custom Field Boxes

Page 2 of 2

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- Beginners (https://www.rcuniverse.com/forum/beginners-85/)

- - Custom Field Boxes (https://www.rcuniverse.com/forum/beginners-85/9524303-custom-field-boxes.html)

therealcrazy8

02-24-2010 10:18 PM

RE: Custom Field Boxes

Hey bbrown2828 any chance you might have a wiring diagram of how you hooked all of this up? :D lol

OzMo	02-24-2010 10:59 PM

RE: Custom Field Boxes

Quote:

ORIGINAL: Deadeye

I made this out of coroplast. Cheap, light, strong, chemical and water resistant. Battery and fuel pod separate from the main box, and attach to each other.

Deadeye,
How many crashed spads did it take to make the box?;) I like corro for such things. I made a nice 24" x 24" x 48" 12 bay balsa bin out of "LEFT WING" coroplast. THANK YOU TO THE DISTINGUISHED SENATOR FROM MO.[>:]

psuguru

02-25-2010 11:25 AM

RE: Custom Field Boxes

Quote:

ORIGINAL: bbrown2828

Ok well i have finshed it... now it has a new set of banna plug ports that will sever as a charge port when the box needs charging and also it will server as a exter 12v to plug in my field charger.... then Ihave a master switch that i can kill all power to the panel while chargeing and also put in a volt meter to check voltage here are the new pics

Nice job. I like the recessed receptacles. Was the recess originally a lifting handle thingy?

bbrown2828

02-25-2010 12:17 PM

RE: Custom Field Boxes

no its a set of banna plug speaker terminals from radio shack

aerofly0610

02-26-2010 12:36 AM

RE: Custom Field Boxes

not bad at all, thanks for the ideas

All times are GMT -8. The time now is 03:24 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page