Hobbico Avistar Engine Mount Question
 

I am looking at buying the Hobbico Avistar Trainer with the Supertigre GS-45 engine, but wasn't sure if the .46 size engine will fit on the Avistar. Can anyone tell me if the engine will in fact fit on the Avistar?? Thanks.

Hobbico Avistar Engine Mount Question
 

The Avistar RTF comes with a OS 40 LA. Most 46's are the same size as the 40 LA.

Avistar-.46
 

A buddy of mine-jump in here if you read this, Ugo-has or had one with an OS .46FX in it. He built the wing flat and it was a great flier. Very decpetive since it doesn't have a flat bottom airfoil the way you think it should. Fast and aerobatic.

Hobbico Avistar Engine Mount Question
 

The super tiger will fit.

Hobbico Avistar Engine Mount Question
 

There' s lotsa room between those metal mounts ! Like Ed said. I had a OS .46FX in my Avistar, and it just fell in the mounts!!
With the .46 for power.....It ain't your Daddy's trainer No More !!
What a Fun Machine !!

Happy Flying.
Ugo

Hobbico Avistar Engine Mount Question
 

bgi, just an FYI, actually, most bearing equipped .40-.46 engines (such as the FX series) are larger than the .40 LA.

Hobbico Avistar Engine Mount Question
 

Okay - thanks. My bad! I popped a 46 FX into the Avistar after removing a 40 LA and it looked the same.

ciao

Hobbico Avistar Engine Mount Question
 

no prob bgi, it's a bit bigger, heavier, and oh-so much more powerful! :D

Hobbico Avistar Engine Mount Question
 

True dat! I didn't leave the FX in there for long. It kept asking to be installed in a better plane! :D

Hobbico Avistar Engine Mount Question
 

now you're talking! What did you put it in?

Hobbico Avistar Engine Mount Question
 

The plane in the photo to the left of this message. :) Aresti.

Hobbico Avistar Engine Mount Question
 

I have an OS46FX in my Avistar and it is great. While I don't have the skill for the moves yet, the owner of our local LHS flew it one time. He walked up and said "how many rubber bands do you have on that?" I said: "ten" He asked me if he could fly it for a little while. Well I bought it from in the first place so I figured he would be good for a replacement. He did moves I only think about. Rolling circles, snap rolls, etc. This went on for about 5 minutes and then he turned to me and said: "see I told you it could do more than most trainers." I admit, I was impressed.

Still have the plane with the same engine, it just needs a few repairs after our flunfly last week.

Hobbico Avistar Engine Mount Question
 

I had an Avistar with the 46 FX and a Macs Pre-Tuned Pipe on it. It would scream. I never clocked it with a gun, but an experienced flyer at the field said it was probably doing 70-80 MPH. I guess I was the proud owner of the worlds fastest trainer.;) This was the RTF version, I just swapped out the engine. I still have the Avistar, with a 46 SF in it, and a tower hobbies muffler. It does pretty good with this combo, but it isn't the same as the 46 FX with the tuned pipe. It was a blast to fly. I agree, it does way more than most trainers.

Hobbico Avistar Engine Mount Question
 

I fly my Avistar with a .46 Evolution

Hobbico Avistar Engine Mount Question
 

PIGman, how do you keep the wing on it flying that fast?

Hobbico Avistar Engine Mount Question
 

about 12 rubber bands, I'm converting to a bolt on wing, it will hover real nice, and does a nice hammer head to.

i use it as a fun flyer now, my stinger is the spped demon, clocked at 110+ mph, ugh i wanna go faster.

Hobbico Avistar Engine Mount Question
 

Geistware
I kept waiting for it to fail, but it never did. I have since taken the tuned pipe, and 46 fx off of it. It still flies great, just not as fast.

Hobbico Avistar Engine Mount Question
 

The 46 will fit and is a good choice for the avistar. You will need to shift the battery back quite a bit or add a little tail weight

Hobbico Avistar Engine Mount Question
 

bgi, nice......how do you like that plane? What are it's aerobatic limitations?

Mike

Hobbico Avistar Engine Mount Question
 

with my avistar i'm doing hammer heads, split S's, inverted rolls, everything i want to do except tumbling and snap rolls. but i pretty much do everything i guess, she hovers nice with the evo .46

my 2 cents, don't mean to interrupt :)

Hobbico Avistar Engine Mount Question
 

OOPS, sorry, didn't read the previous post's

i apologize :(