ESC on-board Sw Mode BEC
#1
Member
Thread Starter
Join Date: Oct 2003
Location: Perth, AUSTRALIA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
ESC on-board Sw Mode BEC
I favor Jeti ESC's with on board switched mode BEC's that can supply up to 5 Amps. I add an additional electrolytic capacitor 4700Uf plugged into a spare socket on the Rx to give additional filtering in the hope of providing a cleaner supply to the system. I have done this only with the gut feeling that it is a good thing however I have not conducted any tests or measurements to ascertain if this is a worthwhile endeavor. I wonder if anyone else has done likewise and perhaps done some tests to check the results?