O.S OMA-5025-375+OCA-1100HV+OCP-1 Help to set!
06-01-2013, 12:28 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: San Antonio de Litín, ARGENTINA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
O.S OMA-5025-375+OCA-1100HV+OCP-1 Help to set!
Good afternoon, I write from Argentina and I am needing some help from fellow modeler that has the OS set the engine OMA5025-375 and OCA-1100HV Esc.
I purchased the developer OCP-1 from the same company to schedule the whole engine, but I honestly do not know much about it and I prefer not to make any errors that may result in the loss of any of the components.
Does anyone have this team and I could facilitate the programming data to configure my set?
This will be mounted on a model "Epsilon 90" CAMODEL company, which previously was using an ASP .91
I will use Batteries are "Zippy Compact 3700mah" and 25C of discharge and APC 16x8E.
From already thank you for your help.
Greetings to all and good flights!
PW: I apologize for my basic English.
I purchased the developer OCP-1 from the same company to schedule the whole engine, but I honestly do not know much about it and I prefer not to make any errors that may result in the loss of any of the components.
Does anyone have this team and I could facilitate the programming data to configure my set?
This will be mounted on a model "Epsilon 90" CAMODEL company, which previously was using an ASP .91
I will use Batteries are "Zippy Compact 3700mah" and 25C of discharge and APC 16x8E.
From already thank you for your help.
Greetings to all and good flights!
PW: I apologize for my basic English.
06-01-2013, 01:30 PM
#2
My Feedback: (9)
Join Date: Jul 2002
Location: St. Charles, IL
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: O.S OMA-5025-375+OCA-1100HV+OCP-1 Help to set!
Hi Aerofede 91,
I am not familiar with the power system you have, but you can get the answer to a lot of your questions by downloading "Drivecalc" a free, online program for predicting performance. It's available in a number of languages. It's definitely worth learning how to use for any e-power pilot.
Hope this helps.
As for programming the ESC, in most cases the default (factory) settings will work.
Be careful with the Zippy compact line. I recently purchased several and they seem to have a very sharp voltage drop and do not recover quickly.
Walt
I am not familiar with the power system you have, but you can get the answer to a lot of your questions by downloading "Drivecalc" a free, online program for predicting performance. It's available in a number of languages. It's definitely worth learning how to use for any e-power pilot.
Hope this helps.
As for programming the ESC, in most cases the default (factory) settings will work.
Be careful with the Zippy compact line. I recently purchased several and they seem to have a very sharp voltage drop and do not recover quickly.
Walt
