Pull starter or roto start???
 

I am new to this so i just want to know what's better a pull start for a stock engine t 15 on the rs4 evo or a pullstarter if there is one, becuase i just had a roto start and the roto starter broke so im wonderin if i should just get a pullstart if there is onee?? and how would you install it, ye some newby questionss styll, anyone help??:D

RE: Pull starter or roto start???
 

Here's the [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGEG6&P=Z]pull starter[/link] that you will need. As for installing it it's just a mater of removing the four screws on the rotostart back plate and installing the pullstarter in its place. Hope this helps.

RE: Pull starter or roto start???
 

ohh thankss for the help, but im wonderin if i should get the roto start again, which one would u prefer, a pullstarter or a roto start?

RE: Pull starter or roto start???
 

i prefer the roto starter but a pull stater is just as good if you engine is tuned correctly. BTW you can buy repair kits for the roto starter instead of buying a whole new one.

RE: Pull starter or roto start???
 

ohh yeeh i just opened the roto start and found that a gear was stripped, where can i get the replacement part? and im also thinking of getting a new engine what kind of engine would u prefer, or which is the best engine for the evo 3

RE: Pull starter or roto start???
 

For the engine get an OS .18 CV-RX. If your getting a new engine there's no point in getting the replacement parts but if you decide not to here's the link. [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXERF6&P=7]Roto start replacement gears.[/link]

RE: Pull starter or roto start???
 

ohh thanxx for the help, how fast does this engine go anywayss, and how much is it?

RE: Pull starter or roto start???
 

It's only $110 on tower and can make your car go over 60 if you gear it right. [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGGP7&P=ML]OS .18 CV-RX[/link]

RE: Pull starter or roto start???
 

ohh i like that, is there more high performance engines, or is this one of the best ones?

RE: Pull starter or roto start???
 

It's the best one for the price. Easy to tune and loads of power.

RE: Pull starter or roto start???
 

Can I put a roto start on my STOCK Rc10gt If so what do I need part number or anything would be helpfull. Thanks in advance! Email me at [email protected]

Don