To offset engine or to not offset engine is the ?
07-25-2008 | 10:51 PM
#1
Thread Starter
Senior Member
Joined: Jun 2006
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
From: Hastings,
MN
To offset engine or to not offset engine is the ?
DA-50 going on a Carden 30% Extra 300.
Using 3" stand offs giving overall distance from firewall to back plate of 7.2".
Plans called for 1.5 right thrust (1994 power), with the DA-50 I figure 2-2.5 right thrust. I have not glued the firewall yet so I can build in the thrust as needed, but what about off setting the engine????? 7.2" from firewall to backplate and 2.0 right thrust = about .2" offset.
I want to know if any of you put in an offset on engine mounting for this kind of setup????
Doug
Using 3" stand offs giving overall distance from firewall to back plate of 7.2".
Plans called for 1.5 right thrust (1994 power), with the DA-50 I figure 2-2.5 right thrust. I have not glued the firewall yet so I can build in the thrust as needed, but what about off setting the engine????? 7.2" from firewall to backplate and 2.0 right thrust = about .2" offset.
I want to know if any of you put in an offset on engine mounting for this kind of setup????
Doug
