cen

Ive had my cen ct4-s for 4 months now could you please tell me in basic form as in how many turns out from tight would it be on the main tunning screw for the beast to rip and how many turns on the clutch adjustment screw until it changes into second?

please help thanks

oh and when will the three gears be out i need to no i cant wait!
and what 21 class engine make etc would sugest?

realfast,

Thanks for your interest in our products! Below are the recommended settings for your vehicle.

Top End: 3 turns out

Bottom end: 2 1/2 turns out

2nd speed clutch shoes: 5 1/2 turns out.

thank you ill be giving that a go very soon!oh and when will the three gears be out and what 21 class engine would you sugest and make.

if any one has done it what make engine did you use and what modifications did you have to do?

thank you.

Three speed will not be out for a while. We have cancelled this project for now. We will have many new items being introduced early next year however. Thanks for your interest.

CEN RACING

could you please tell me what the part number is for the better gears on my ct4s

thank you

realfast,

There are two different set-ups for the CT4. There is a top speed setup that comes stock with the CT4S. Then there is a track Gearing set-up. Which is listed below. It is not neccesarily a gear set up it is a belt and pulley set up.

Track Pulley set-up which is included with the CT4R

Main Belt CT019
Rear Belt CT011

Replacement pulleys. CT015x2 needed.
These are 16t pulley that replace the 25 T pulleys.

What this does. is increase the low-speed of the car tremedously. Top speed loss will be apx 10mph.

CEN RACING

hey uh, i know this doesnt REALLY have to do with the ct4s, but somewhere i read that you guys offer engine blocks that make it so you could stick a .21 in the ct4s. those blocks have been evading me, becasue i want to get some to stick in my FF, but... cant find them.
one more thing, i dont think you guys really need a 3 speed on the ct4s, becasue it already hauls, and were you to stick a nice .21, like a ws7II, then it would fly

thanks for that prople,there seems to be alot of movment in the front wheels.when the wheel has been screwed on to the wheel shaft there's alot of movment from where the dog bone meets the the diff cup and wheel shaft. have you got any ideas on how to minimise the movment?

thank you dan

oh one more thing could anyone tell me how to put a 21 engine in my already beast and has anyone done, if so what make engine did you use how easy was it and what modifications did you have to do if any? any good links to do with a ct4s eould be nice. thanks