yet another nx problem!
02-09-2008 | 09:20 AM
#1
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
From: dublin, IRELAND
yet another nx problem!
hey guys
this time y steering servo completely locks one way the only way to get to move the other way is by useing the servo reverse switch on the radio and even then it just locks the oppisite way.the real odd thing is that when i put the steering plug where the throttle one should go it works fine!and the even weirder thing is that i have tried this on 3 different working recivers and still no change!
any help will be greatly appreciated!!
this time y steering servo completely locks one way the only way to get to move the other way is by useing the servo reverse switch on the radio and even then it just locks the oppisite way.the real odd thing is that when i put the steering plug where the throttle one should go it works fine!and the even weirder thing is that i have tried this on 3 different working recivers and still no change!
any help will be greatly appreciated!!
02-09-2008 | 10:16 AM
#2
Senior Member
My Feedback: (4)
Joined: Feb 2005
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
From: Ellensburg, WA
RE: yet another nx problem!
ORIGINAL: dar123
hey guys
this time y steering servo completely locks one way the only way to get to move the other way is by useing the servo reverse switch on the radio and even then it just locks the oppisite way.the real odd thing is that when i put the steering plug where the throttle one should go it works fine!and the even weirder thing is that i have tried this on 3 different working recivers and still no change!
any help will be greatly appreciated!!
hey guys
this time y steering servo completely locks one way the only way to get to move the other way is by useing the servo reverse switch on the radio and even then it just locks the oppisite way.the real odd thing is that when i put the steering plug where the throttle one should go it works fine!and the even weirder thing is that i have tried this on 3 different working recivers and still no change!
any help will be greatly appreciated!!
02-11-2008 | 01:35 PM
#5
Senior Member
Joined: Feb 2005
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
From: Auckland , NEW ZEALAND
RE: yet another nx problem!
Best thing cen did a while back was the radio swap programme...where you sent your cen radio in and 50 bucks and got a airtronics mx3 back...it was cens way of saying, hey our stock radios are crap, we will try and make up for it!
You could send your old radio back to them and they would most likely replace it, i found them good for warranty stuff, but would you really want it!
My advice is cut your losses and buy a half decent replacement for it...
You could send your old radio back to them and they would most likely replace it, i found them good for warranty stuff, but would you really want it!
My advice is cut your losses and buy a half decent replacement for it...
02-11-2008 | 02:05 PM
#6
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
From: dublin, IRELAND
RE: yet another nx problem!
i would send it in but i live in ireland and i think i would take a while for the new one here, i have an ok radio here so i`ll use that for now!
once again thanks guys!
once again thanks guys!
