Need Webra 50 muffler
 

Lost the rear half of the Webra muffler on my Webra 50 GT today[&o]-I think the 50 is built on the Webra 40 case.
Any of you guys have a spare or even the back half???

Thanks,
Jim

RE: Need Webra 50 muffler
 

Hi Jim

As Webra is gone parts are next to impossible to get.

You could see if you can find a after market "Snuffler" insert that will fit into the front half, you could see if another brand muffler will fit.
There were alot of after market strap-on mufflers that may also fit, also Mac's may have a tuned Pipe set that will fit, would cost more but
there would be a fun factor :D


Johnkpap

RE: Need Webra 50 muffler
 

Yeah-too bad we lost Webra. Had not thought about the Snuffler option, thanks!

RE: Need Webra 50 muffler
 

Hi. Just in case you didn't solve your problem, yet, I've been using with very good results the modern 40-45-51 Supertigre Muffler on my Webra 50. With a minor holes enlargment (even if I hate to enlarge the holes!) the muffler adapter can be bolted to the Webra, and then you also have the possibility to rotate the muffler at your liking.
Give it a try, there are a lot of Supertigre mufflers around! ;)
Beppe

RE: Need Webra 50 muffler
 

Actuall have a few of them myself and had given that some thought. Do you know if the ST 40 muff is any smaller than the 51 muff?

RE: Need Webra 50 muffler
 

Jim,

Dub Jett had an adapter that fits a Jett muffler to my old Webra Speed .61. He may have a smaller adapter to fit the .55 size muffler to your engine. Doesn't hurt to ask. He answers the phone himself.

ChiefK

RE: Need Webra 50 muffler
 

I have one. Let me know if you still need it. I usually use a macs header with mousse can pipe or tune pipe, or use a jett muffler or anything else. the webra muffler doesn't really muffle it and robs power as well. If you still want it however let me know...it's never been used.

RE: Need Webra 50 muffler
 

E mail sent.

Jim