Carbon Fiber---HELP!!
#1
Thread Starter
Join Date: Nov 2006
Location: St. Clair,
MI
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber---HELP!!
Hi Members,
I am building a Royan CESSAN Citation that I'm converting to turbine power (Lambert-Kolibri T32's) and need to find out where I can have a part made from Carbon Fiber as I am unfamiliar with making parts from this material. It is the main component that attaches the cruciform tail group to the fuselage and will need to be far stronger than the plywood it was originally designed with (I know, I just broke it[X(]). It is 1/4 (6mm) thick around 6 inches long. I have included a couple of pictures. Any help would be greatly appreciated.
Sincerely,
Terry
I am building a Royan CESSAN Citation that I'm converting to turbine power (Lambert-Kolibri T32's) and need to find out where I can have a part made from Carbon Fiber as I am unfamiliar with making parts from this material. It is the main component that attaches the cruciform tail group to the fuselage and will need to be far stronger than the plywood it was originally designed with (I know, I just broke it[X(]). It is 1/4 (6mm) thick around 6 inches long. I have included a couple of pictures. Any help would be greatly appreciated.
Sincerely,
Terry
#2
My Feedback: (9)
Join Date: Jul 2002
Location: Stone Ridge,
NY
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
RE: Carbon Fiber---HELP!!
Check the following link. These guys do all kinds of carbon fiber items.
http://www.dragonplate.com/
Hope this helps.
http://www.dragonplate.com/
Hope this helps.