Hacker A30-16M
08-16-2005 | 06:12 PM
#1
Thread Starter
Member
Joined: Aug 2003
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
From: Leicester,
NC
Hacker A30-16M
Anybody got any first hand experience with this motor??? I am thinking about putting it on
a home made profile at about 22-26 Oz's...I have been using a Himax 2816-0890 on one that
weighs 22.5 Oz's and it flys it well, but am looking for a little more power...Any info would
be appreciated...
Howard
a home made profile at about 22-26 Oz's...I have been using a Himax 2816-0890 on one that
weighs 22.5 Oz's and it flys it well, but am looking for a little more power...Any info would
be appreciated...
Howard
09-01-2005 | 04:45 PM
#2
RE: Hacker A30-16M
Ive got the A30-16M in a Hobby Lobby Prodigy running the X30 controller. I've found that the 11x5.5E prop gives me the best performance with either the TP prolite 1320 11.1V (calm days, 3D - AUW 24oz) or the TP 2100 11.1V (windy days, pattern - AUW 26 oz). Pulling 28Amps in static full power......
This set-up really performs well! Good luck!
Greg
This set-up really performs well! Good luck!
Greg
