Balance tap for telemetry voltage
I fly 3s and 4s in my gliders
futaba 14sg with telemetry the external voltage supply is supposed to be soldered into the Motor battery wires but i use a voltage led readout and beeper that I leave plugged into the balance tap it works fine when I hear it beeping I land i was thinking of using a "Y" harness on the balance tap and if the external voltage connection to it i found a website that described connecting low power consumption devices to the balance tap and they work fine all I need is a voltage read out they draws little to no power plus my led readout/beeper is this ok? jon |
Sorry no one answered and I don't know the answer, but would be interested in what you learned.
|
I found a website on use of lipos
he says that you can use a balance tap for all sorts of things i googled lipo balance tap use or something all I want to do is measure voltage for telemetry |
Google
lipo balance plug uses i found an article from tjin tech - all about lipo balanceconnectors and rc universe - pulling power from the balance plug a response was - 1-3amp max and be careful to not draw too much from individual cells it will unbalance them jon |
All times are GMT -8. The time now is 07:12 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.