mCPx Noob Help
03-14-2011 | 04:03 AM
#1
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
From: Fenton, MI
mCPx Noob Help
Just got a mCPx on Saturday. Been flying a mSR to date.
OK, this will definitely take some time to master.
As a beginner, I feel that the throttle and pitch curves even in the normal mode are too aggressive. To learn how to control the heli, I programmed a fixed pitch of 95% and a flatter throttle curve in the mid-stick area and that seems to allow for a more controlled flilght. Could this set-up damage the motor?
Well, just managed to hit the curtains and the tail boom broke off. Hope the LHS has spare parts.
OK, this will definitely take some time to master.
As a beginner, I feel that the throttle and pitch curves even in the normal mode are too aggressive. To learn how to control the heli, I programmed a fixed pitch of 95% and a flatter throttle curve in the mid-stick area and that seems to allow for a more controlled flilght. Could this set-up damage the motor?
Well, just managed to hit the curtains and the tail boom broke off. Hope the LHS has spare parts.
