blade cx
#2
Senior Member
Joined: May 2005
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
From: Lafayette,
LA
I just bought mine and never flew a heli before. I find it pretty easy to fly. I also bought a Blade CP and I find it much much harder to fly. I think you will like the blade cx. Just take your time and make sure you use the trainer balls.
Later, Mike
Later, Mike
#3
Senior Member
Joined: May 2005
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
From: Lafayette,
LA
Oh and yes it can be flown outdoor as long as the wind isn't strong. I flew mine about fifteen minutes ago and there was nearly no wind, and I flew without crashing.
Later, Mike
Later, Mike
#5
Member
Joined: May 2006
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
From: Omaha, NE
I watched a little kid fly a CX today,looked like there is nothing to it.
Myself,I think I would be bored with it within a week.
I started to hover today with the CP
Myself,I think I would be bored with it within a week.
I started to hover today with the CP
#7

Joined: Jan 2006
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
From: Burgettstown,
PA
You can learn how to hove,r and learn the controls. You can learn how to fly in basic forward flight. Aside form that, there is nothign to learn.
They are great for fun. If you ge ta boat, I hope you have a rowboat or a canoe. Chances are you will have to go out searching the waters for your boat. Good luck with whatever you choose. Honestly, the helicopters are harder than the boats, but more rewarding. There is only so much water you can play on, there is air everywhere, so the possibillites are endless.
Good luck.
John
They are great for fun. If you ge ta boat, I hope you have a rowboat or a canoe. Chances are you will have to go out searching the waters for your boat. Good luck with whatever you choose. Honestly, the helicopters are harder than the boats, but more rewarding. There is only so much water you can play on, there is air everywhere, so the possibillites are endless.
Good luck.
John
#8
Senior Member
Joined: Dec 2005
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
From: hutto,
TX
I bought a Blade CX after I mastered a Blade CP. It's extremely easy to fly. My wife can hover it as long as i'm managing the throttle and rudder. The CX is fun for flying round the house and landing on stuff. Chasing the dog, Entertaining guests, etc. It's great to learn on but you cannot do FFF.
#9
Senior Member
Joined: Feb 2006
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
From: decatur,
AL
well I got a cx for my b-day and love it. I chase the cat and stuff like that. I just put a string and magnet on it. To recover downed paper clips. I know it is extremly easy but hey I love hovering and chasing the cat cant afford a cp right now.
#11

Joined: May 2006
Posts: 5,238
Likes: 0
Received 0 Likes
on
0 Posts
From: Greenwood,
IN
My friends are completely awed when I fly my CX over to there drive way, land, hover about 40 feet or so and do crazy stuff. It's realy a fun heli to fly. Watch the wind.
Dave / Choppersrule
Dave / Choppersrule
#12
Senior Member
My Feedback: (1)
Joined: Feb 2005
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: , NY
my dad bought a cx and he is terrible and i cought onto it right away now i love flying it in the front yard and around the yard makin fun of him since he sucks at it. the only thing is the battery dies pretty fast and the stock charger takes so long. i know its a li-po battery but does anyone make a better battery that last longer and a better charger?
#13

Joined: May 2006
Posts: 5,238
Likes: 0
Received 0 Likes
on
0 Posts
From: Greenwood,
IN
You may consider just getting another battery. One of the main concerns, would be the size of the battery. The mount for the battery is very precise.
Anything bigger would not fit. If your looking for flying times like 20 minutes or so, then you have to consider overheating the motors.
That will shorten the life of the motors. Even after a 8 to 10 minute flight, you should let the motors cool down for 10 minutes or so. I have several batteries, and have flown 2 batteries in a row and the motors get extemely hot.
Just things to consider,
Dave / AKA Choppersrule
Anything bigger would not fit. If your looking for flying times like 20 minutes or so, then you have to consider overheating the motors.
That will shorten the life of the motors. Even after a 8 to 10 minute flight, you should let the motors cool down for 10 minutes or so. I have several batteries, and have flown 2 batteries in a row and the motors get extemely hot.
Just things to consider,
Dave / AKA Choppersrule
#14
Senior Member
My Feedback: (1)
Joined: Feb 2005
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: , NY
ok yea that was my second choice was jsut to buy a second stock battery b/c they are pretty cheap from my lhs. the other concern is though is that does anyone know of a better charger
#15

Joined: May 2006
Posts: 5,238
Likes: 0
Received 0 Likes
on
0 Posts
From: Greenwood,
IN
A better charger??? I may be wrong, but a better charger won't charge them any faster, if that's what your looking for.
The Lipo techniology is very critical, these babys can catch on fire. Never leave them unattended.
Dave / AKA Choppersrule
The Lipo techniology is very critical, these babys can catch on fire. Never leave them unattended.
Dave / AKA Choppersrule
#17
Member
Joined: Jan 2006
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: Mesa,
AZ
Actually the charge rate on the stock charger is .5 amp and since it's lipo you can charge at a 1c rate which is .8 amp, I have done this with my balance lipo charger many times and the pack doesn't even get warm.
#19
Member
Joined: Jan 2006
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: Mesa,
AZ
heh meant charging at the .8 amp rate. I have a blinky balance charger that balances the cells through the charge jack, you then charge the pack through the discharge pack. There are a lot of reviews out on it now and it does pretty damn perfect balancing for 25 bucks as long as you have a lipo charger. I have had it a month or so now and it has performed great for me every time.
#21
Member
Joined: Jan 2006
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: Mesa,
AZ
Astro Flight for the blinky, Don't recall which of the 3 current magazines did their article this month but between Model Airplane News, Fly RC, and Backyard Parkflyer one of them had a article this month. It has been getting articles for about 3-4 months now and was just released. Here is the like to it.
http://www.astroflight.com/e/env/000...roducts:af-106
You still require a charger that is designed for Lipo Batteries, this just makes sure they are balanced. Has some circuitry in it too which is supposed to help if you overcharge a pack it takes it to 4.2 volts and if you over discharge using it connected at a 1/10th charge rate till it hits a certain voltage is supposed to refresh the pack to usable.
I can't tell you about the overcharge and overdischarged functions as I have done neither to the different Lipo packs I own.
For a charger I use the dynamite lipo charger as it was the only one at the local hobby store that had a AC/DC plugin so I could use it anywhere without needing a extra power supply to charge at home.
http://www.dynamiterc.com/Products/D...ProdID=DYN4053
I think I paid about 80 bucks for it at a hobbytown usa.
http://www.astroflight.com/e/env/000...roducts:af-106
You still require a charger that is designed for Lipo Batteries, this just makes sure they are balanced. Has some circuitry in it too which is supposed to help if you overcharge a pack it takes it to 4.2 volts and if you over discharge using it connected at a 1/10th charge rate till it hits a certain voltage is supposed to refresh the pack to usable.
I can't tell you about the overcharge and overdischarged functions as I have done neither to the different Lipo packs I own.
For a charger I use the dynamite lipo charger as it was the only one at the local hobby store that had a AC/DC plugin so I could use it anywhere without needing a extra power supply to charge at home.
http://www.dynamiterc.com/Products/D...ProdID=DYN4053
I think I paid about 80 bucks for it at a hobbytown usa.
#22

Joined: May 2006
Posts: 5,238
Likes: 0
Received 0 Likes
on
0 Posts
From: Greenwood,
IN
Wired,
Thanks for the information, I appreciate it. I'll be checking it out. I like the idea of an AC/DC charger. So you can use it at home easily, without lugging around a 20 pound 12 volt battery.
Dave AKA / Choppersrule
Thanks for the information, I appreciate it. I'll be checking it out. I like the idea of an AC/DC charger. So you can use it at home easily, without lugging around a 20 pound 12 volt battery.
Dave AKA / Choppersrule
#24
Member
Joined: Jan 2006
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: Mesa,
AZ
Zelatio,
Problem with that is the amperage rating, You couldn't charge say you rc cars packs on it or some of the larger lipo's due to amp draw. What me and choppers are referring to is most of the high end Lipo chargers only have a DC input, Which either requires a 5-10 amp dc power supply ($50-$70 bucks) or a external battery to use to charge with.
Problem with that is the amperage rating, You couldn't charge say you rc cars packs on it or some of the larger lipo's due to amp draw. What me and choppers are referring to is most of the high end Lipo chargers only have a DC input, Which either requires a 5-10 amp dc power supply ($50-$70 bucks) or a external battery to use to charge with.
#25
Member
Joined: May 2006
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: Fairfield,
CA
I'm with Wired203. I own a dynamite ultra peak charger and that baby is so versatile. Also charges your batteries as quick as it can. My lipos stay cool the whole time they get charged.
Makuku68
Makuku68



